Beneteau 423 Rig Conversion

Now that weve had the boat for a couple of weeks and Ive been able to dig deeper into the systems and construction of the Finisterra and Im able to start putting together a serious to-do list. Our purpose is to outfit the boat for long distance cruising so the number one item on the list is to lose the in-mast furling system. There are two basic ways to go about this. The easiest is to simply pull the roller furling main out of the mast, put slides on it and run it up the luff groove that is built into the mast. The other option is to chuck the entire roller furling (RF) mast and sail, and buy a new rig. Of course there are a few options between those two extremes, but they arent worth talking about.

Beneteau 423 close reaching under a 140% jib and RF main

After pondering the alternatives and doing the math, we chose to go all the way and put a new rig in the boat. Youre probably wondering why someone would take a perfectly good rig out of a boat and exchange it for something that is usually more work to set trim and douse. My answer is that RF mains work well for many things, but they can fail in ways that could be inconvenient at best and dangerous in some circumstances. They also cant deliver the performance that a full battened main can. In terms of danger, all you have to do is visit the B423 message board to read about a range of problems people have had with their RF main sails. Sails jammed in the slot, batten pockets torn, more jammed sails, maintenance issues on the furling system, etc. Dont misunderstand me, most B423 owners seem to love their RF main sails and have very few problems with them. But if youre planning for offshore cruising to remote places with a shorthanded crew, you want your rig to be 100% manageable in all conditions. So its out with the furling rig.

As it turns out, we can do the conversion for a very reasonable price if we manage it well. US Spars, the company that built the original B423 rigs happens to have some mast extrusions left over from the production days, and agreed to build a new classic rig for us at a very attractive price. We found a local rigger here in SoCal who will take the old rig on consignment and we can surely sell the sail at Minneys, our local marine surplus store. So with the new rig, modifying the boom and buying a new mainsail, I estimate that the entire project will cost around $15.000.

423 with classic main and stackpack

We will include a Battcar system, lazyjacks and a Stackpack to make sail handling easy. With full battens the sail falls neatly into the pack, eliminating the whole flaking exercise. More importantly, the sail can be reliably reefed in all conditions. Ill keep you posted on the progress for this project.

Mainsail neatly stowed. 

Beneteau 423 First Impressions

We took possession of our new 423 last weekend and renamed it Finisterra. Yesterday we went for our first sail and finally had an opportunity to try the boat on all points of sail under power and under working sails. Here is a brief summary of what we discovered.

We left the slip in the downtown marina and took advantage of the flat water and light air in the turning basin to see how the boat maneuvers in forward and reverse. Finisterra is equipped with a Slipstream 3 bladed folding prop. We found that it operates smoothly when going from neutral into forward or reverse and provides plenty of thrust in forward. Outside the marina we saw 7 knots with the Yanmar diesel running at 2,200 RPM. Since its a folding prop, it takes some throttle to get the boat moving when backing down, but overall performance is good. We had a three blade feathering prop on our last boat and it would occasionally snag some seaweed, so I think this prop is a good compromise for our purposes.

Sailing conditions were excellent with about 12 knots of breeze that built to about 16 in the afternoon. I unfurled the mainsail and I have to admit that its awfully easy to operate the in-mast furling system. We puttered around under the mainsail only for half an hour. Its a tiny thing with a hollow leach and no battens but it has fairly good shape and pushed the boat along at about 5 knots in 15 knots of wind on a beam reach. I was pleased to see that it is in nearly new condition. With the 140% jib set, the boat came alive and we drove upwind with the apparent wind angle at about 40 degrees and about 7.5 knots of speed. Later, as we bore off to a close reach, the speed increased to about 8. Easing sheets a bit more, we put the boat on a beam reach and saw 8.5 on the knotmeter. Bearing off further brought the wind on the port quarter and our speed dropped as we expected. At all times the helm was light and well balanced, and perfectly responsive. Sailing back toward the marina the wind fell to about 5 knots as we approached the marina entrance and the boat ghosted along very nicely. I rolled up the jib and fired up the engine, then furled the mainsail just before entering the marina. All almost too easy. Our berth is near the head of the gangway and the fairway is narrow so its a tight turn into our downwind slip but the boat maneuvered easily and we made our first landfall perfectly.

Having designed, built and sailed a number of racing yachts, I expect my boats to perform well. There is no need for a cruising boat to be a slug in terms of performance or handling and the B423 meets my expectations. I struggle with the idea of in-mast furling. I prefer the strength and simplicity of a full battened main and slab reefing and will likely convert this rig. Other than that, were very pleased with the boat.

Honcho Sold

The Honcho at the shipyard, ready to be hauled out and packed up for the road trip to Anacortes.

Last Friday we finished up the paperwork and handed the keys to the Honcho over to her new owners, who will have her hauled out and trucked to Anacortes where shell be relaunched. From there shell sail to her new home in Sidney, BC, Canada.

It was bittersweet to see the boat go because we had such an enjoyable four years with her. But all things must end, and with the Honcho off to her new home we are ready to begin to search in earnest for our next boat, which is the first step toward new sailing adventures. We were very fortunate to have found the Honcho, a boat that had been lightly used by her previous owners. Wed like to find another boat that has had no modifications or upgrades so we can start with a clean slate and set it up for offshore cruising with top quality equipment.

Over the last few months weve looked at quite a few boats in person and online. We really liked a Delphia 40GT that we found in San Diego, but it was sold a few weeks before we could make an offer on it. Ive reviewed several boats in previous posts here that caught my eye, but so far we have not settled on a particular make or model. At this point I would say the Beneteau 423 comes closest to what were looking for. It seems to embody that balance of design, construction, performance, comfort and budget that were looking for, and is the benchmark that weve been sort of measuring other boats by. If we werent constrained by a budget Id say the Hallberg Rassy 412 would fit the bill nicely, but of course our budget cant handle that much boat. But a boat of that ilk is what were looking for. Ill keep you posted as we wander around the country searching for the perfect, or almost perfect boat.