Some nice pics from the past

It’s a beautiful day here, I’ve just had lunch, am sitting in the main cabin looking out over the river at the water sliding past.  Its heading for the open sea, a space full of wide horizons, islands and adventures waiting to be had.

Being as summertime is so close, I thought I’d post these pics that I came across while doing some digital filing. They’re inspiring.  Roll on summertime.

David Perillo in Navigator “Jaunty” and Paul  Groom in Pathfinder “Varuna”.

http://www.jwboatdesigns.co.nz/plans/navigator/index.htm

http://www.jwboatdesigns.co.nz/plans/pathfinder/index.htm

Thanks David for the pics, I bet they bring back memories.

And thus begins the Season Three

I AM ZINEA, PTERODACTYLUS, has officially splashed for its third season.

Sail onwards, friends, for there is not a minute to be lost!  Stay tuned, intrepid reader.

On the metaphorical road again heading for more small boat sailing adventures

The brotherhood of the travelling boots.

Its occurred to me that the hikers boots that I’m wearing have been to seven different countries so far, they’re good friends the two of them, get along well even though they’re almost twins. One of course is a lefty and the other a righty but even so they seem able to co operate and generally arrive wherever it is that they’re going at about the same time.

I’m on my way again, this time to Chile,  will arrive in Santiago in about 18 hours.

Right now I’m sitting in Auckland International airport, within a few metres of the Percival Gull aircraft that Jean Batten flew from England to New Zealand in 1936, setting a number of aviation records on the way.  That flight took 11 days and 45 minutes to cover a bit more than 14000 miles. 

I’m going to be travelling in an aircraft that barely resembles that tiny single engined spruce and canvas plane.  In fact it would be no real problem to fit the “Gull” into the cargo hold of the big Boeing that I’ll be imprisoned within for the 13 ½ hour flight across the Southern Pacific Ocean. We’ll be travelling at around 590 nautical miles per hour, how different it is from Jean in her little light plane t125 mph.  I bet she didn’t complain about the cabin service in her tiny cockpit .

Jean Battens Percival Gull airplane, as I write this Im sitting about 2metres away from the wingtip on the left of the picture, its a graceful little thing, but a real reminder of how much aviation has progressed since then, remember too that Jean Batten was with us until 1982, so most of this amazing progress has happened within the space of a long lifetime.

This trip I’m making is by the way the longest uninterrupted stretch of ocean that there is north of the five great capes about twice the distance that it is across the North Atlantic from USA to UK.

Which brings me to why I’m travelling.  I’m to meet up with friend and co teacher Howard Rice, and we’re going to be setting up for the big voyage of exploration that he is undertaking next southern summer.

That voyage, in a modified SCAMP, all of 11 ft 11 in long ( 3.575M ) will leave from Punta Arenas in the Straights of Magellan, carry him out through the channels and straights into the Pacific where he’ll turn left, and head south toward Cape Horn.

That latter is not necessarily the objective of the voyage, but rounding “The Horn” is a possibility.  The real purpose of the voyage is to explore the least populated and most rugged coastline on the planet,  riven with steep sided fjords, many with glaciers at their heads, backed by mountains, many un named as yet, and battered by the incessant gale force winds of the Roaring 40s this is an extraordinary place, and one which Howard will be exploring, and documenting.

There will be cameras on the boat, as well as within his support crew back at Punta Arenas, there is already some video “in the can” and the intention is to make a comprehensive video of the voyage, a video which will be available to anyone wishing to see the grandeur of the wildest place on the planet from the viewpoint of a small boat sailor.

There is more on the boat and the voyage in Howards Facebook page here

https://www.facebook.com/search/top/?q=howard%20rices

Yes it costs by the way, and if you’d like to support this, check out the directors website here. http://www.below40south.com.  There is also a lot of information on the voyage there.

  Any donations would be very gratefully received, we’re covered for the actual filming but the production costs will be significant and even a small amount would help to get what will be one of the great small boat adventures out where people can share it.

So I’m sitting here in Auckland airport with several hours to wait until the big silver bird roars down the runway and turns out eastward over the sea.

Its not boring, I’m in a quiet corner upstairs, this is one of the better airports that I travel through, and I’m alongside a glass wall where I can watch the people flow like a gently stirred anthill.  It’s the arrivals area just below me, and there are friends, parents, siblings and visitors arriving, it’s heart warming watching the enthusiasm and emotion with which they are being welcomed.

But I’m going the other way, I’ll be among that crowd downstairs in 20 days.

Home again and back to work

Home again.

It’s a long way home from Vancouver to my ship in Auckland, Skytrain in Vancouver (great public transport, quick, quiet and cheap! Well done Vancouver BC) then a flight to San Fran, (very nice airport terminal by the way, so much better than LAX, in future I’ll be  paying the slight difference in airfares to avoid the latter) then the loooong 11 ½ hour flight across the Pacific,  then two buses and a 2 km walk towing my suitcase. 25 hours in all. 

You have no idea how glad I was to walk up to the crest of the hill and look down on the river!

Just a comment on airline comfort, Air New Zealand now has seats where a family or friends can fold the oversized leg rests of adjacent seats out to make a couch. Behind me there was a couple with a young child, and they were able to get much more comfortable than is usual in cattle class.

I was super lucky on this flight and was the only one in a row of three so was able to lie down flat, got some “real” sleep which makes a big difference. Recommended, even if you can’t get an empty row those seats are better than any others I’ve seen.

Other than that, I watched (again, for about the fifth time) the first two episodes of  “The Hobbit”, noting all the places in the scenery that I know and have been to.

Its an odd feeling watching a fantasy movie and recognising the mountains and the hills in the background, fun though.

I made it through the trip in fairly good shape which is a relief, a couple of trips ago I would not be fit for much for a week or more afterward but today I’m good. It will take a day or two to reset the sleep cycle, but today I’m going to be working on the drawing board some, have to do some lawnmowing, will be off up the river in the kayak for my excersize run for the day, and will be putting the mast box into SEI. 

There is not so much to do to the little boat now, and I’m determined to get her in and sailing in time for our summer.

I miss sailing small boats, they give a feeling of connection to the water that bigger boats don’t, and its been a while since I had a boat that I could sail on impulse, my little gaff sloop takes an hour from arriving at the ramp to sailing, and an hour to pull her out and unrig her.  Much too long for a sail after supper, but SEI will take maybe 10 mins, less if I leave the rig set up and just bundle the sail and spars.

Note that the rig fits in the length of the boat so its all “inside” when being transported, I trimmed the mast by about 100mm and altered the plans to do this, makes things much easier.

On sails, for SEI I have one of the OZ Racer RSS sails from Mik Storer, you can get these from Duckworksmagazine 

www.duckworksbbs.com/sails/rss/index.htm

Nice sails, very well made, and super well priced!  I expect to be able to put up a post telling all about performance and set, but from what I have seen so far I’m impressed.

Its dead of winter here, the shortest day is only two weeks away, we lose another four minutes out of an already short day, dawn is about 7 30 am, and sunset about 5 15pm.  Yes I know its not anything like the UK or the Northern states, Canada or Scandinavia, but its still wetter and colder than summer, so its heater on so the pens will work, and sitting at the drawing board with my dog curled up asleep in the warm.

Nice, I don’t mind the weather at all.

But roll on springtime.

J

Nose to the grindstone again

Or at least hands to the sanding block,  I’m unexpectedly home so have a chance to get some work done on SEI.  Its cold here, but the daytime temps are ok for WEST epoxy with fast hardener, and the sun comes in through the big windows keeping the shop warm enough for me to work in without heavy clothing.

So I’m sanding off the plank landings, the fillet between the skeg and the bottom and will be running a coat of ‘poxy with microballoons over the ‘glass to fill the weave before a final sand and then primer paint.

Sandpaper time.   Again.  Powered by elbow grease, It always seems to come to this.

I’ve several part pots of Toplac white oil based marine enamel, they came with my ship and that’s what I plan to use when I repaint her in our spring, and am very tempted to use that so I can get accustomed to its peculiarities before getting into the really big job of repainting the 40 ft motor boat.

So SEI will be white, boring but practical, pale green inside to reduce the glare, maybe some darker green highlights and possibly varnish on the seat tops just to tell people that she is a wooden boat.

Its nice to be at a stage where I can see the launching day off in the distance, we’re in the depths of winter here now, traditionally the worst is still to come but the daffodil plants are poking their heads up, I saw the first lamb of this season the other day and we’ve gained over an hour of daylight since the shortest day so there is, just occasionally,  a hint that there might be spring sometime .

I’d like to be sailing SEI when the good weather comes.

On the techo side of things, Howard Rice and I are both of us fans of anything that saves time when building  boats.  Our time on earth is limited so anything that speeds the building up means that we can build more of them, plus SCAMP Camp is a real teacher in that respect.

To explain, SCAMP Camp is 10 days, plus a little work over the in between weekend if the students want.  It’s a challenge to bring beginnner students along faste enough to get those boats ready to ship out on day ten, and anything that saves time is welcome.

We’ve been using the Ryobi cordless brad nailer for a while now, and it’s a real asset, saves about the equivalent of a day on each boat which is major.

We use the Makita builders laser cross level which not only makes it much easier to get the boats straight and true, but it takes a lot less time to do it.

The latest addition to our bag of tricks is the WEST System six10 cartridge epoxy glue system.  

The two parts of the glue are housed in separate chambers within the cartridge, and extruded through the blue mixing tube on the left of the "gun".  There are spares of those available as they are not cleanable but there does not seem to be a problem keeping a part used cartridge.

We don’t use it everywhere on the boats, just for the planking where the ability to run a controlled bead along an edge is very useful, and much faster than mixing by hand, pushing that into a ziploc bag and doing the cake decorating thing.  Sure its more expensive by volume, but there is very little waste and to give you an idea, at SCAMP Camp this year we were hanging a plank every 10 minutes, just about an hour and a half to do a pair of planks on each of the four boats we were building.  I remember that at the first SCAMP Camp we took more than double that,  that’s a saving of about half a day per boat.

Howard Rice running a bead of epoxy along the edge of a SCAMP plank.  The striped shirt is not compulsory equipment for this sort of job but it sure helps ( create laughter at least).

http://www.westsystem.com/ss/new-six10-epoxy-adhesive/

Well worth the little extra cost!

Isles of Shoals again!

Another blast out to Isles of Shoals for my Goat Island Skiff!

The intrepid reader will remember last years trip.  That trip was C-R-A-Z-Y with a roaring tailwind J-Pirate and myself hung on for dear life and made it the Isles in about an hour, and that included non-direct route a pansy-jibe (the 270 deg. tack).  The way back was 3 hours in pounding waves.  I went a second time with L-Man, and it took 3 hrs to get out there in fickle winds and a strong current, and about 1.5 hrs back.

Well, the other day L-Man and myself went out there in about 1.5hrs!  He felt better about all this Isles of Shoals stuff.  Epic snorkeling ensued.  The water was amazing.

I put two similar pictures because the water color was so awesome.  L-Man took some video!  Effing right, youTubes videos, Amateur Style continues to push the edges of technology!

http://www.youtube.com/watch?v=NxR2ppWVHV0

You have to click on the link because I couldnt embed it.

The way back.... L-Man not so happy.  With a screwed up current and strong winds from the same direction, FOUR HOURS to get back to the harbor with a stint of slow rowing.  Dismal, after a while.  I would like, for once to get there and back without some long slog.  SIGH  So beautiful, but we pay the price.