Santiago a hot day and were travelling tonight

Today Howard and I have been walking the town looking at the sights, there are some very grand buildings, lots of parks and fountains.  

 Its a seriously hot day by my standards, probably around 35 deg C, and while the humidity is low its warmer than Im comfortable with.  Id have given a lot to be able to strip off and sit alongside these two, but that guy leaning on the pole in the background though that it might not be the best idea.

 One of the many ornate and imposing buildings here, theyre well lit up at night and this part of the city is well worth a walk just to see them.

 There is a park with walk and cycleway right through the city, it runs alongside the river below which is carrying the last of the summer melt from the mountains you can ( just, look hard and youll see them) see in the background.  

Weve changed some money, got packed up and checked out of the hostel BellaVista ( recommended by the way, good place if you like hostels) and are shortly off to catch the overnight bus to Porto Montt. That’s way south, about a 10 hour drive so we’ve booked on an up market bus with lay down seats and more space per passenger.  Yes it has a restroom!

 While walking the town we met some very nice gentlemen, mine is a policeman, Howards was sitting in what might have been a barbers shop.  While his friend was better dressed mine was a bit more active.

In the morning we’ll pick up a Chevy Spark rental, actually a Kia Picanto with a Chevy badge on it, and from there we drive to Punta  Arenas to do more toward the “expedition “  that will happen next Southern Summer.  We need to find storage,  sort things out with customs, find accommodation and check out things like launching and docking facilities for the boat. 

We’ve been told that the drive is something special, there will be pics!

Its really hot today, so I’m in the hostels upstairs courtyard where there is a little breeze, looking over toward the mountains and the cablecar that runs through the zoo.  We’ll check that out when we get back on 23^rd,  its not until 26^th that we fly out so there will be time to do some tourist things after the government things are done.

More gaps between BHs and bottom

Today I planed down the chinelogs to flat, in order to fit the bottom at some point in the near future. Unfortunately for me, something somewhere didnt add up.

When I cut the notches in my BHs, I was very careful to use an actual slice from my chinelog to trace a pattern for the notch. Somehow, my notches were too deep laterally, I have gaps there that need filling. Today I now realize that they are also too shallow vertically... after planing the chinelogs flat, I have a gap between the bottom of the BHs and the chinelog. Take note from BH3:


When I fit the bottom onto the boat, the gap is clear (boat is upside down):


This is especially frustrating because:

1: I measured the notches using an actual piece from the chinelog
2: I was very careful to do my best eye-balling job that the bottom of the ply appeared to meet the bottom of the BHs

In retrospect I should have:

1: After the dry-fit turn the hull upside down to get a good look at what was going on
2: Do a test plane portion to see where a flat chinelog ends up in relation to the BHs

So now I can do one of three things:

1: Fill the gap with loads and loads of epoxy when I put on the bottom
- Risky because I could deform the bottom if I screw too hard placing it into position
2: Fill the gap with a strip of wood that is painstakingly cut and glued into place
-Annoying work, AND it wont match the BH bottom frame
3: Continue to plane down the chinelogs until they match the BHs.
-I lose freeboard AND it could make the boat too wide at the bottom and the pre-cut ply for the bottom wont be able to accomodate the new width.

For all its worth, heres the boat with the bottom kinda on:


Ive just decided that solution #3 is not a good one.

I have now just decided to go with option #2.

Interestingly enough, BH1 came out perfect!... WTF, Over?

Daggerboard trunk glued up and rear seat glued on

Ok my patient mates, heres some photographic evidence of my work on the boat last week before I left for self-imposed exile at work.

First, I finally got that bedamned daggerboard trunk glued up.  Somehow, I wasnt forward thinking enough, and I glassed up the daggerboard without really giving much thought to how it fit in the already made trunk.  Well, I did but discounted further planing on of the daggerboard and decided that I was done with all the planing and sanding thank-you-very-much and whatever I had, I had.

This was most unfortunate, because I few more minutes of planing would have produced a superior quality board, and it would have fit in my daggerboard case.  So then I was stuck with the project of widening my case, but only by 2-3mm at most because really, all I needed was 1-2mm.

Fortunately, I found 3mm Okoume marine plywood at Goose Bay Lumber, and cut it to fit over the framing for the trunk.  This widened the trunk appropriately.  Here is the widening sequence in pictures:

Very self-explanatory, I think.

Next, I still struggle with the hardward issues for the rudder and transom gudgeons.  I dont know how Im going to get this rudder assembly attached to the boat.  The problem is that the hole to accomodate the tiller does not have the vertical clearance required to use a gudgeon-pintle scheme, which is by far the most convenient.  I toyed around with it and thought about enlarging my tiller-hole, but my pintle arms didnt fit around the rudder cassette.  A second order of larger, more heavy-duty gudgeons for rudder and transom fit great, except not with each other, and the arms were too long for the spacer in the cassette... A rod pushed through the gudgeons would not have fit cleanly and I would have had a clunky feeling rudder, the round peg in an oval opening thing, if you can visualize that.  So I still sit, wondering how I will fix this conundrum.  Many people have done it successfully, but Im still hunting around for the best hardware.

Because of all this drama, I have delayed gluing on the rear seat.  I got tired of having it loose, and glued it on before I left.  Here, yet again, is my "Forest of Bricks" holding it all down.

And the gratuitous parting shot:

Spring is just around the corner Well several corners and a couple of straights really

Three minutes and forty four seconds.

Not a lot, you cant do much in that small amount of time.  I can type about 100 words, walk a hundred and fifty yards at a gentle pace, paddle around twice that if I am pushing it along, or brew a cup of tea.

Today I’m working on taking off the plank offsets for SEI, and I can tell you that although it’s not a complicated job, it takes a great deal more time than that. I’ve been on it most of the afternoon and it’s a job nearly done.

But todays time here in the southern hemisphere between sunrise and sunset will be three minutes and forty four seconds longer than the shortest day a couple of weeks ago. The seasons are heading for springtime and we’ll soon be able to tell the difference! 

I will be heading for summertime in 10 days time though, the long trip to Port Townsend has become an annual event for me, SCAMP Camp is a fixture these days, usually run just before the Port Townsend Wooden Boat festival in September this one has had to be scheduled early due to the Maritime Center being booked for our usual time so I am in there in a couple of weeks time being a Schoolmaster teaching people to put their kits together.

It’s a long trip, and most of the airlines go through LAX That place is my least favourite airport on the planet and I’d got to great lengths to avoid travelling through there, so this time I’ve managed to get a decent deal on the tickets with Hawaiian Air, flying via Hawaii then into SeaTac. No I don’t get a stopover, drat.

But its going to be an interesting northern hemisphere summer for me, Jackie Monies and I are touring, from Port Townsend to Michigan, back to Toledo Or for their boat show, then Port Townsend for the Wooden Boat Festival, then wandering south to Oklahoma, Texas and the Port Aransas PlyWooden Boat show.

Once we can get our heads together in PT we’ll be working out where we’ll be, who we can call on, what we’re doing. Our thoughts are to post our schedule so people will know when we’re in their area, stop for a day to meet builders and interested people, talk boats and other nonsense, then drive to the next stop.

All this takes time, more than the 90 days that my visitors permit allows, so I have to leave not only the country but “neighbouring countries and Island territories” as well.  So it looks as though we’re going to Belize, just for a few days. 

Could be a lot worse.

It will be well into spring when I get home to New Zealand again.

Hope to see you somewhere along the way.

JW

RePost from Planing Around

SimonLew in Florida has decided to cater to his aesthetic sensibilities and is resurfacing his Goat to make it run-free, as posted on his excellent blog.  This works well for round birdsmouth masts.

The video link is below.  I would have embedded it in this post but Blogger is apparently at war with me right now and wont allow it.

http://www.youtube.com/watch?feature=player_embedded&v=vi4WqYgPc44#!

Facebook travel and stuff

We’ve  started a Facebook page,  I’d tried to do that a couple of years ago but got annoyed at how many emails it dumped into my inbox and spent ages trying to unsubscribe to no avail.  But since Yahoo made such a mess of their Yahoo groups system Facebook has become much more popular, and it seems the way to go.

With the help of Jackie Monies and Chuck Leinweber I now have a Facebook page that works, and I  am impressed at how many people have joined up.

My thoughts are that I’ll use this blog for mostly technical stuff, tools, ( I’ve another one to report on, have the photos and will do that in a couple of days) building, projects, and such, and use the facebook for more social stuff and interactions with everyone “out there”.

So if you have not caught up with it, here is the link.

https://www.facebook.com/groups/440526479459574/

Today,  in about 6 hours I’m walking up the hill towing my suitcase, heading for the bus stop into the city where I’ll catch the airport shuttle,  this trip is a long one,  3 months, I’ll be back in late October.

Ive several boat shows to attend, sailing events, SCAMP Camps,  Red Lantern Rally, and lots of driving.  Ill be visiting several JW builders, seeing a lot of new places and meeting friends new and old. 

Travel at this time of year is not a bad idea, its summer in the USA, and here we’ve just had the coldest day for more than 60 years, its raining right now and my heater is on full. So I’ve got to pack, tidy the ship and switch all the systems off, go and rob the bank, then its make that walk up to the road and along to the glass bus stop with the amazing view out over the sea.

Slow going

More slow going here in NH, very very little has been accomplished as of late. Between work, 5 F. deg. temps, and a sore back, Ive been laying off my boat for a bit.

In the meantime check out my compatriot in CA!

The GIS fleet is building, people are getting STOKED, sailing will be going down! What are YOU waiting for!?!?

A Season in Mexico Part I Security and Health Care

 Now that the Honcho is back in the USA weve had time to sit back and review our experience in Mexico and pass along some information that you might find valuable for your own voyage south. In part one, Ill discuss security and health services as we found them on our travels. In later posts Ill review our route in Mexico, marinas and anchorages we visited, food and dining, and Mexican officialdom. Lastly Ill review the Honcho, how it was set up and rigged, what worked and didnt, and what we would do differently with regard to the boat. Bear in mind that this is our personal experience and yours will certainly be different in any number of ways.

Security

There is certainly no shortage of security in Mexico. We spent a lot of time in a number of harbors and marinas, some of which were in urban settings and some in resort settings. We also anchored in remote places where there were few if any people within miles. We also traveled fairly extensively ashore using various modes of transportation:  On foot, private car, rental car, taxi, bus, train and commercial airplane. Our shoreside travel took us to resort areas, big cities, towns, villages, and some places that we considered to be Mexicos outback. We traveled in the states of Baja California Norte and Sur, Jalisco, Nayarit, Guerrero, Sinaloa and Chihuahua. We visited exclusive resort destinations as well as grittier destinations where tourists are rare.

In general, security in every marina we visited was pretty good. Electronic gates and watchmen with radios were present at every marina we visited. We never lost anything to theft and usually felt comfortable leaving the boat unlocked during daylight hours. When anchored out we frequently hoisted the dinghy out of the water  as a precaution in some areas, but never heard of anyones dinghy getting stolen while we were in Mexico.

One thing I think unfortunate was that a few Americans brought their biases and prejudices with them to Mexico, and were in my opinion overly suspicious of Mexicans. I believe those people missed out on one of the greatest pleasures of cruising in Mexico, which is getting to know and understand the Mexican people, whom we came to regard as the friendliest people weve ever met.

Practically everywhere we went in Mexico there were plenty of heavily armed police and military personnel. It was not unusual to see a truckload of armed and masked police on the roads or parked next to a bank. On the water we had numerous encounters with Mexican Navy personnel. They were always heavily armed, and were also always polite, courteous and professional. For our own part, we were always friendly toward them, and were never treated with anything but respect by them. With that said, I can understand how it can be unnerving to see a boat with a squad of masked men carrying assault rifles bearing down on you at high speed. I should also point out that in the ports of L. A. and Long Beach, its not unusual to have a patrol boat with a .30 cal machine gun mounted on the foredeck bearing down on you if you happen to stray too close to a cruise ship in the harbor.

We did have one negative experience that involved Mexican traffic police in Puerto Vallarta. Four of us were driving a rental car on the highway and were pulled over and shaken down for 500 Pesos by a local cop. Its a fairly common occurrence in that area. Mexicans told me later that the government is working to get rid of corruption in local police forces, but it still happens. 500 Pesos is the equivalent of about $45 USD.

Throughout most of our travels on mainland Mexico we felt quite safe, except when we were in the state of Sinaloa, which is home to one of Mexicos most notorious drug cartels. Mazatlan is Sinaloas largest commercial port and is reputed to be a major shipping point for drugs and as a result there has been some violence there. Enough to cause the cruise lines to stop visiting there until security improves. This is unfortunate because Mazatlan turned out to be a beautiful and charming city, and once we became familiar with it, we were able to relax and enjoy it.

We traveled by bus through Culiacan and spent a couple of nights in Los Mochis, which are supposedly the nexus of the Sinaloa cartels empire. There we noticed many police checkpoints along the way. The checkpoints were sandbagged and the police were usually helmeted and masked. However, we never felt personally in any danger as we rode through them on a pretty luxurious express bus.

We used the same common sense in Mexico as in the USA: Be aware of your surroundings and keep an eye on your possessions. Leave the diamonds and Rolex at home. Dont flash wads of cash around. Be careful at ATMs, and use only those that are at banks and other reputable institutions. Stay off the streets late at night. Dont do things you wouldnt do in the States. Know where youre going and avoid high crime areas.

Here are some statistics that I took from a cursory internet search:
Homicide rate for Mexico (2009): 15 (per 100,000 population)
Homicide rate for the USA (2009): 5 (per 100.000 population)

Below is a chart of crime statistics for Mexico and the USA in 2004.  In some ways Mexico is safer than the USA, and some ways more dangerous.

Crime Rates in Mexico per 100,000 inhabitants
	2000	2001	2002	2003	2004	USA in 2004
Total Crimes	1433.81	1439.41	1391.54	1521.93	1503.71	4118.76
Murder	14.93	15.13	14.11	13.94	13.04	5.62
Murder with firearm	3.45	4.54	3.66	3.53	2.58	1.25
Assault	254.35	257.39	260.39	260.41	251.91	NA
Aggravated assault	171.06	172.02	185.01	187.33	186.68	310.14
Rape	11.89	11.9	13.33	13.05	14.26	32.99
Theft	148.27	108.11	100.22	116.74	112.47	2445.80
Automobile theft	161.15	161.52	162.10	150.66	139.86	432.12
Robbery	316.54	274.63	219.59	158.16	146.57	145.87
Burglary	145.72	153.58	142.58	NA	NA	746.22
Fraud	54.63	50.48	50.96	54.64	61.47	NA
Drug offenses	20.62	23.97	24.65	23.38	23.40	NA
Source: 7th[1] and 8th[2] Survey,

Source: http://en.wikipedia.org/wiki/Crime_in_Mexico

Health Care

First some statistics which I took from the CIA World Factbook:
*Infant mortality rate: Mexico 18.42 (112th), USA 6.26 (46th) of . Global average is 42.09 for the 224 countries in the list.
*Life expectancy: USA 78.4 years (50th). Mexico 76.06 (71st). Global average 66.57

Based on these statistics, it appears that Americans can expect to live a healthier, and slightly longer life than Mexicans. But the statistics do indicate that both countries could do much better. Sweden, Australia, Canada, Spain and even Britain do better than the USA with regard to infant mortality and life expectancy.

Fortunately we never got sick or suffered any injury that required medical attention. Our experience with routine medical services was that it varied from very good to rather poor. Prescription drugs cost roughly half what they would cost in the USA. We did hear of several other cruisers who did use Mexican medical services for conditions ranging from injuries due to falls to heart attack and were generally pleased with the outcomes, and usually thrilled with the low cost of care in that that country. My impression is that those near the bottom of the socio-economic scale dont dont get much health care in the USA or Mexico, those in the middle classes get fairly good care, and those in higher classes get very good care in both countries.

Quick Fair is amazing!

HOLY BALLS its been a long time since my last update.  Work has been eating me alive, folks, eating me alive.  Im actually home now for more than one day, so I can update this blog, and work on the boat, but in the reverse order because the boat comes first.

Several weeks ago I ordered some Quick Fair from the fine folks at Duckworks.  This stuff is A-M-A-Z-I-N-G.  Its well worth the money.  It mixes easily, quickly, with little fuss.  It applies itself with astonishing ease, especially using a plastic spreader.  It dries quickly.  It sands easily.  I made several corrections over time as I got used to the stuff and ended up with a chine that is-- wait for it-- very fair.  It filled in the little weave bumps left over from the fiberglass tape, it nestled into the ridge between the tape and the hull that hadnt been filled with epoxy, it filled in some holes, and it faired out the gap between the hull and the stem-dowel-thingie.

I am in love with Quick Fair.  To boot, it even looks like chocolate pudding, except if you ate it, you would die.  The smell tips you off to this.  It smells, bad.  I used my respirator.

I also bought a little digital scale for twenty bucks at the local pharmacy.  Its a "The Biggest Loser" scale, named after the TV show, I believe, I wouldnt know because Ive never seen it in my life, but the box talked about it.  This made mixing the Quick Fair in the appropriate manner mucho-easier, because frankly, theres no way to tell how much you have.  It doesnt pour into a graduated cylinder or anything like that.  I am also using this little scale with my epoxy, and it cuts down on waste.  Another "shouldve thought of this a while ago..." moment.

Heres my chine, needing some serious fairing, including little holes in the fiberglass tape that sanded out because there was air trapped underneath and Hand of God seriously pissed:

And bingo!  Quick Fair to the rescue!

Heres a progression of working around the stem.  Slop it on, spread it out, sand it, touch up, presto!

Oh boy!

For all your fairing needs, Quick Fair is the way to go.

I watched this video for some very good tips.

Progress on SEI and a really good evening out

Ive been working away in the shop, fitting the seat tops and filleting them, turning the offcuts into doublers under the edges and sanding out the odd dribbles of epoxy,  read on.

Blog 4 September

Its getting close,  today I fitted the forward seat top.   Tis is in two pieces joined down the middle and glued in to form  to form not only the seat but the top of the forward bouyancy tank, as well as bracing the mast box.

 Filleting, the white stuff is a low density filler from Epiglass with a little cotton mill fibre ( glue mix) mixed in, thats for strength. The brown is Microballoons but underneath that is a smaller fillet of straight glue applied about 6 hours before.  

So that’s done, yesterday I fitted the doublers under the edges of the center thwart and the after seat ( which should be referred to as “Stern sheets” but I’m not that “correct” in my terminology).  These doublers make a big difference to the feel of the boat, stiffening the overhanging edges of the seats considerably as well as giving them a much more “solid” appearance.

These adoublers re made from the scrap left over from cutting the big parts, there wont be much more than kindling left when I’m done with this project,  successively smaller parts get cut as the project goes on,  so the scraps get smaller each time around.

Stern sheets, the doublers sitting on the seat  above where they will be fitted underneath the overhanging plywood seat edge.

Center thwart.  This is a great way to use the offcuts from the planking, makes a much nicer job of the edges of the seat. Next job to do is to glue them in, then round them off.

Forward seat tops to come next.

So tomorrow its at them with the angle grinder and sander to finish off the endges, round them over and fair them.  Then some filleting, more sanding,  and then its time for paint.

I must say that the Fein Multimaster is an amazing tool for sanding fillets, the point of that triangular sanding head with 60 grit paper on it does a very good job, effortlessly and quickly.  I love this tool and would almost own it just for that.

Paint, the outside looks good,  two coats of primer, and two coats of  satin finish paint looks good, so tomorrow I’ll be splitting the white between two containers and pouring a little of the dark green into one to get the pale green for the interior and then start swinging that paintbrush again.

Tonight, my friend and next door neighbour Emily Scott sings.  She has won a scholarship to the UCLA School of Music where she will study in the Masters classical voice program,  this is seriously top level stuff!  I’ve been to a couple of performances and she’s got me converted to Opera.

Tonights performance is a fundraiser, she’s got to get enough money together to live in Los Angeles for two years to take up her scholarship, and I’m going along.

We’ve had shared dinners, helped each other out some, and enjoyed each others company.  I’ll miss her, all the very best Emily.

http://www.creative.auckland.ac.nz/en/about/news/news-2014/2014/07/scholarship-helps-talented-singer-find-her-voice.html

Here’s her facebook page, well worth a look.

https://www.facebook.com/profile.php?id=675895038&fref=ts

Time I got myself tidy, don’t need the black suit and tie but epoxy and paint covered overalls wont quite cut it.

( I went, full house, I listened, I enjoyed the concert immensely)

The Seven Wonders of the Dutch rowing World

The Netherlands is a short flight from the southern UK and their weather is similar to ours, but their rowing clubs are practically on a different planet.

Last weekend, I went on an informal 29km rowing tour there with Dutch friends, followed by a conference on touring rowing (organised by Toer!) the next day in Amsterdam, and was bowled over by what I found.

Wonder Number 1. Soft cushions!
We were the guests of a member of Baarn watersports club on the river Eem, south-east of Amsterdam. As you often find on the continent, there was a special cushion for the coxing seat of our touring coxed quad. So far so nicely organised.

But this club had taken the concept to a new level with monogramed embroidery: you cant quite see it in this photo, but the orange line of characters on the right are the Club name, and the small group in the top left are the boat name (so you dont accidentally take the wrong cushion for your boat – perish the thought).

Its kinda, "If Charles Tyrwhitt did boat cushions..."

Wonder Number 2: Rowing into a gallery
Anyway, we set off, and had a pleasant row past many fields to  the small town of Amersfoort, which mixes well-kept old buildings, with the most modern of modern architecture, and a great deal of "art" scattered all over the place.

This must be "art".
Not a clue what else it could be...

There was even a chandelier under the railway bridge. The perfect lighting if you were having a floating dinner party, I guess. Though possibly only for people using sign language, given the rumble of trains overhead.

Wonder number 3: The longest boathouse

Paddling back out of town, we stopped off at Hemus rowing clubs brand new home, which is, without doubt, the most spacious boathouse Ive ever seen (with the possible exception of Northeastern in Boston). 

Boats, almost as far as the eye can see.
Note also (OK, with a magnifying glass) the standard arrangement of a touring boat on the floor at the bottom of every rack, with fine boats above.
That, people, is how many touring boats the average Dutch club has. Wow OH wow.

The full length boat bays had no fewer then FOUR racks of boats along them (OK, not all VIIIs, but there were some), with copious spacing above each boat. You know how clothes are displayed in the windows of smart boutiques: a choice piece, carefully arranged on its own against complimentary surrounding. And you know how your rowing kit is stuffed into a big bag. Well, there you have Hemus rowing club compared with your average boathouse: a sort of zen of boat racking. You can just feel the calm, cant you?

As you might expect, there was also a massive bike park and a complete lack of car park, and to my utter astonishment, a sedum roof. Not sure what else I can say about that, other than !. And !!

But then the next day, I found another sedum roof at RIC in Amsterdam (I did take a photo, but once youve seen one picture of a boathouse with a sedum roof, youve seen em all) so, based on a sample size of three, I concluded that around 67% of Dutch boathouses have sedum roofs. I wonder if there are any in the UK? 

Wonder Number 5: No soggy towels, thanks, were Dutch!
Amidst such shiny new-ness, I was reassured to see that the club had clearly brought one thing from their previous shed: the obligatory 1950s mangle that I have observed in almost all Dutch rowing clubs, for wringing out the boat-wiping towels (where do they GET them from?).

Incidentally, when I say "almost all" clubs have these, the club back in Baarn where we started didnt have a mangle but had hurtled recklessly into the 21st century and had a dedicated boat-towel washing machine. Shocking stuff.

Wonder Number 6: What goes on Tour...

What goes on tour are Dutch rowers apparently. Big time. All the clubs I visited had a Tour Calendar on their club noticeboard, listing at least 12 events for the season, and I discovered that every club has a Touring Committee. A permanent group dedicated to organising tours (plural). Perhaps I should emigrate?

Wonder Number 7: Expressing rowing through the medium of...

When youve rowed for as long as I have, youve generally seen it all in terms of rowing lifestyle accessories: paintings, mugs, boxer shorts, ornaments, you know the kind of thing. But at RIC I found some novel ways of bringing rowing indoors. First, perfectly supporting Dutch stereotypes about painted tiles, the youth section had produced a set of decorated rowing tiles in the clubs orange and black colours:

The river was mapped on one of the bars coffee tables in inlaid marquetry (you cant see it in the photo blow, but bridges and locks were marked):

And finally, a highly creative member had expressed a tour route in the medium of tapestry:

Thats it for wonders, but like the sprinkles on your cupcake, heres a final fascinating fact pertaining to the social history of rowing. British rowers are well aware that  rowing use to have an obsession with "amateur" status, and the fact that (back in the day) it might only be done by "gentlemen". This led to the founding of clubs like Thames Tradesmen Rowing Club, whose members were barred from joining some of the amateur" clubs because their work involved a physical element. Rowing clubs in Amsterdam, however, followed different social divisions, with RIC having its origins as the Catholic rowing club (I gather that sectarian divisions ran as deep as British class divisions, till even more recently, not just with separate Catholic and Protestant schools but also hospitals, political parties and even TV channels). Apparently another club had originally been Jewish.

Photos: Martin Paasman and Helena Smalman-Smith.

Seats fitted

The seats are all fitted to the boat. The glue is cured on the supports, the vertical supports have been cut to fit (they will be glued next session) and the seats are in place. The side-arms for BH2 and 4 are cut and ready to be glued. The knees are cut and almost finished. Inwale spacers are cut, the inwales need to be scarfed and theyll be ready too. Things are moving.

Heres a great example why you want to diagram out the dimensions of the front seat per the plans, and then trace something to what youve actually got in the boat before you cut:


Unless youre a very gifted woodworker, of which there are many out there (this is an AMATEUR BLOG, remember?) tracing will be beneficial. The dark black lines are per the plans for the GIS. What you see is what my front seat ended up being to fit in the bow. A little wider up front, very close in the middle, and then wide again in the rear. Ive got a few ideas how this came about, but Im glad I didnt just cut and then try to fit it only to find huge gaps both in the boat and in my wallet as I shelled out 60 bucks for another sheet of ply. This is not a big deal in the end, its truly a slight variation of shape up front, and so it goes.

Heres a few exposures of my beautiful craft as she comes together. Looking good!

My big day

Today was quite the day. Im over my cold, as in, I dont feel like super-crap anymore, but my head and chest are still congested to hell and back. However, since Im slowly on the up and up, off to the basement for a little R+R.

Last night I realized that I had beveled the bottom of BH1 in the wrong direction. Today I fixed this by re-beveling it flat, and just leaving it as such until later. If I have to bevel it in the correct direction, so be it. Its only 2mm so its not too tricky.

Second, I found this:

Delamination in the ply on my Starboard bow, inboard. Approximately 4"x6" or so. Nothing on the "mated" side, the Port stern, so Im assuming it is only this piece that has the problem. I sounded it out with a pencil, and Ive got a good idea of its shape. I poured straight epoxy into the hole, then squashed it with bricks.

Third, I discovered this:


Thats my finger pointing at where the bow SHOULD be. OOPS. Im slowly coming along with the dreaded stem, and I went to match the stem to the bow and it came up a couple of cm short. Either my stem was wrong or my bow was wrong. I busted out the lofting map for the sides and for some damn reason, I measured 55mm from the end of the ply to the point of the bow rather than 55mm from the last 300mm mark. Damn, bro, good catch! So I re-marked the bow and cut them anew on both sides. The stem fits perfectly now, with room to spare for the bow knee.

Then, I got gutsy and ripped two of my cedar planks and and scarfed them for the chinelogs:

This is my scarf. Some of you are really going to hate this, but I eyeballed it on the table saw, and then planed them to match. Not perfect, but close enough for this amateur! I used a 1:6 ratio, so that would be 1 1/2" : 9".

THEN, I cut out the buttstraps and glued my scarfed chinelogs and my side together!


Here we are now in the garage. The buttstrap gluing kinda blew, I was by myself and I rushed it. I was sure I put on enough glue, but very little actually oozed out from underneath the straps. Im actually a little concerned I may not have put enough, but maybe I put just the right amount, I tend to go overboard with the glue. So well have to see about this.

Finally, I glued on a little piece of ply for backing on the transom for el rudder. Thats Spanish. That in itself was a mini-adventure, because the ply I chose for it initially starting sliding around after I glued it up on the old epoxy from the frame and the seat cleat. WOOPS. So I pulled it off quick, tore apart the garbage for an old jigsaw blade, and holding the jigsaw an inch above the ply ripped a small piece of one end so it could sit better between the frame and the cleat. Of course I got wood dust all over the backing, and I scraped it off, threw on some thickened epoxy, and called it good. I thought this would have been a simple operation, so I didnt wear gloves and holey moley my hands got sticky.

On a blog-related note, I am deleting the timing scoreboard from the blog. Its beginning to get inaccurate and more difficult to keep up with. Today I did a million things and Im not keen on attempting to figure out what was what. So maybe from now on just a tally total.